Outdoor Garden Furniture such as picnic tables comes in a variety of shapes and sizes. There is the climb in models or the walk in models. Some have backrests and some don’t. Some are 4 seaters, some are 10 seaters and some are round or octagonal. The choice of design is endless really and limited only by your imagination. A garden, in my opinion, is incomplete without one and many a day will be spent utilising this very cost-effective, yet versatile piece of Outdoor Garden Furniture called a picnic table.
They can be made from a variety of timber but we have found CCA treated Pine to be the most cost-effective. Provided the timber is treated to at least an H3 level, the picnic table will last many years in the rain and sun. H2 is what is normally available from your timber yard because they are supplying largely the roofing industry, but H2 is not treated enough and will rot. H3 is your normal decking material and is suitable to remain outdoors exposed to the elements. We can however make them out of whatever timber you require, but some timbers do become cost prohibitive, unless you are working to a uncapped budget.
Our biggest sellers are the walk in design with or without backrest. The walk in allows you to slide along the chair without having to climb over the seat to get your feet in. The walk in does however take up a bit more space than the climb in but are, in my opinion, more comfortable and is what you normally find in most pubs around South Africa. The walk in with backrest takes up considerably more space than the ones without the backrest, but does allow you to lean back of course. They also need to be accessed from either side instead of climbing over the seat. They can be made with an attached bench, the most popular, or with a detached bench. The ones with detached benches are sometimes used indoors too as breakfast tables. In this instance one might want to consider using a timber other than pine to give it a cleaner and more appealing look than pine.
Our picnic tables are generally made from stock that is 30mm thick and 100mm wide although this can vary from 23mm thick to 110 wide depending on how much machining needs to be done to get the wood to planned on all four sides.
Screw holes are covered using clear epoxy mixed with saw dust to match the colour and they are then sealed in a choice of tint using a good quality timber preservative. Timber preservative keeps maintenance to a minimum as there is no sanding that is required. When it comes to time to re-seal simply clean and apply 2 or 3 more coats. Applying varnish type coatings will result in the coating peeling and flaking over time and all of it will need to be sanded off which is near impossible.
Again we do not produce these tables in flat pack as they simply won’t last. They are pre manufactured in our factory and then transported to site.
A similar design is also available in a kiddies size and can be painted in bright colours rather than a wood stain effect.
For a free no obligation quote, please complete the form below or call us on 082 496 5444.
- Lutyens Bench – outdoor garden furniture (thewoodjoint.co.za)