Solid Wooden Floors Installed in Saligna in Toti

Solid wood flooring Durban

Click to enlarge

Here’s a solid wooden floor we installed using saligna in Toti, South of Durban. These solid wooden floors were done in saligna boards of about 22 x 72mm wide. The width of each board is always dependent on how wide the boards originally come in at. So these boards came in at about 25mm x 76mm ( a standard timber size in construction) and were machined down to 22 x 72mm.

They are normally machined as a tongue and groove (see picture alongside). This allows the installer to slot each piece into each other as he moves from one end of the room to the other. They are unlike the other boards we used in Hluhluwe (see a few articles before) where they were end matched.

Because the saligna is locally grown in South Africa (gum) they are available in much longer lengths. This is also due to the fact that a gum tree, grows relatively straight and one can obtain long lengths from the tree. The lengths of saligna we used here were all 3m lengths. So there is no need to end match the tongue and groove as one either cuts the end off to match it up to a bearer or you can install a bearer midway between the main bearers to accept the end of the floor board thus reducing waste.

We were installing a new floor here which had to match the existing floor as closely as possible. The existing floor boards were about 68mm wide, but we would have wasted too much timber planning them down that far. The difference between 68mm and 72mm is not that great (4mm in fact) and considering that they are being laid next to each other instead of matching them up on ends, the difference in width is not noticeable.  Once everything was sanded again it all matched the same colour.

The colour of new and old timber varies initially, but this very soon changes due to exposure to UV and within no time it matches almost perfectly the colour of the older timber.

Solid wood flooring Durban

Click to enlarge

We sanded these floors with the floor drum sander to get rid of any ridges between floor boards and sealed the wooden floors with a water based polyurethane floor sealer in clear and sheen.

The difference between water based floor sealers, solvent based floor sealers and epoxy based floor sealers will be discussed in other articles on this blog, but for the purpose of this exercise I have gravitated between two of them, water based and solvent based for some years.

As water based products evolve in their technology, I am swaying more and more towards this technology as an alternative to solvent based products. They are for one a lot less harm full to the environment, and to a greater, or lesser, degree are at times better on the pocket as well as the time and effort taken to apply them.

For a free no obligation quote on your solid wooden floors, laminates or engineered flooring, please call us on 082 496 5444 or you can contact me via the contact form below.