Wooden Floors and Laminates

Solid Wooden flooring Durban and Cape Town

Click to enlarge

We specialise in Solid Wooden Flooring, Laminates, Parquet flooring, Dustless Floor sanding and Sealing and repairs to wooden floors.

Wooden floors exist in many different forms from Swiss Parquet, Parquet, Sprung or Suspended Floors or wooden floors that are adhered to the substrate. They come in many different types of wood and each one has its own unique characteristics and pro and cons. From the menu bar on the right you can navigate to the different types and read up and view pics of the different styles. Alternatively you can use the search bar above to the right to search for something more specific. There are articles on this site of jobs we have completed with pics and the various challenges we overcame in the installation.

Solid wooden floors were very popular in years gone by and in about the ‘70s were all covered up with carpets and other types of flooring. They are making a strong come back now and are very popular due to their warmth, charm and the ability to maintain them relatively easily and cost effectively. Take a look under your carpets and you may find some very nice teak flooring that can be restored back to its original beauty at a relatively low-cost.

For a free, no obligation quote, on all your wooden floor requirements please contact us on 082 496 5444 or use the contact us form below.

Parquet Flooring Installer Durban and Cape Town

Parquet flooring Installer Durban and Cape Town

Parquet flooring was very popular many years ago but a lot of it was covered up with carpets back in the 70’s. It seems crazy now that one could cover the parquet flooring with carpets, but that was the thing of the day and fashions come and go. I’ve recently refurbished several parquet floors by sanding them down and re-sealing them after old carpets have been lifted and they still hold their charm.

There are various types of parquet floor one can get using different wood that gives a slightly different grain, colour and texture. Of course you should always purchase your parquet flooring from a reputable supplier to ensure that you are getting top quality. Your floor will need to last many years and you don’t want to spend the money on installing it only to have to re-do the work later. Also as timber ages it naturally darkens so to try to match the colour of timber with new pieces is very difficult.

Parquet flooring comes in tiles which are made up of the small strips you see. So they are not all laid individually but rather as a sort of tile which is about 300mm x 300mm squares. It makes it much easier to lay and will result in a better finished product because of course there is less room for error in laying them. They are glued down to the floor using a suitable adhesive. Again the floor needs to be completely flat in order to achieve a good quality result. If the floor is not flat, screed it first to remove low and high spots first and then lay your floor.

The individual strips are normally laid perpendicular to each other to give it effect but some very interesting patterns can be found such as herringbone, triangles and inserts are also possible. Parquet flooring is very versatile and you can lay the tiles in just about any pattern you wish and the choices are limited only by your imagination.

For the budget concerned folk out there an alternative to buying new parquet flooring is to use second-hand parquet flooring. I have seen many houses have their old parquet flooring ripped out and discarded. This timber is still sound as most of the older houses used good quality teak in their floors. With a little cleaning and sanding those parquet floor tiles can be made to look like new. Don’t discount the value of second-hand tiles.

To finish the floor, you should sand it using the floor sander, fill any gaps with a suitable gap filler, sand again and then move up to finer grits remembering to sand into the corners with a smaller rotex style sander. A good quality polyurethane should be used either in mineral based or water based. Water based is of course more easily applied, less messy and one can apply multiple coats in the same day as it dries very quickly. Remember to sand lightly with a fine grit paper between coats to get rid of the hairs which stand up after applying coats. This will result in a smooth finish. The polyurethane comes in either high gloss, matt or satin. The choice is yours.

For a free no obligation quote or advice on your parquet flooring please complete the form below or call us on 082 496 5444.

Solid Wooden Flooring Installers Durban and Cape Town

Solid wood flooring installer Durban and Cape town

There are two ways one can install a solid wooden floor. One is to apply the boards directly to the concrete substructure using adhesive and the other is to suspend the floor with joists or batons. This is sometimes referred to as a sprung or suspended floor.

In the first method it is imperative that the substrate is completely flat. If the floor is not completely flat, the boards will lift because they will go down under stress and over time will pull themselves up. If the floor is not completely flat you MUST screed it and get it flat. Or you can opt to install a sprung floor. However installing a sprung floor will result in the surface being about 50mm higher than it was or 30mm higher than the other method. Reason being is that there will be a baton underneath the boards to accept the floor board. So double-check where your floor will end up before choosing the method.

I will go into more detail about each method in two separate articles which you can search for in the search bar on the right, but for the purposes of this article I will just touch on the types of timber one can choose and a broad outline of solid wood flooring.

There are various types of timber that can be used for solid wood flooring. Each one comes with its own characteristics and properties. Some are harder than others, some are less prone to marking because they are dark coloured. What I find most important is to choose a timber that will not move much after installation. All timber will move as it expands and contracts due to fluctuations in temperature, moisture in the atmosphere and other factors. These will all vary with the seasons and in different parts of the country the variation will be different. It is always a good idea to bring the timber to site where it will finally be laid and let it acclimatise for a few weeks before installing. If the timber for instance was kiln dried and then stored in Durban on the coast, then later moved to Gauteng it will move because of differing temperatures and moisture in the atmosphere. So it should be allowed to rest for a few weeks before installing. In fact it should be allowed to rest before machining so that any movement can be removed through the machining process resulting in a flat, square, stable board. There is nothing more frustrating than laying solid wood floor boards only to find that later they have cupped or bowed slightly and unsightly gaps appear between boards or worse still they start to lift. It is not always possible to let them rest before machining but at least allow them to rest before installing so that any movement can be seen before installation and corrected where possible.

One can try to match the colour of the timber to the rest of the room. Saligna for instance is slightly pinkish in colour whereas teak will be a much darker wood and sometimes with dark heartwood and lighter coloured sapwood. You can get creative in matching the colours and interspersed dark with light. If you feel like get really clever you can use different types of wood in your floor but be careful to try to match the timber in their density so that all the pieces will expand and contract at a similar rate.

Your floor should be finished with a good quality polyurethane either in mineral based or water based. Water based is normally preferred as it allows you to apply several coats in the same day. Also it is better for our environment.

For a free no obligation quote or advice on your solid wood flooring please complete the form below or you can contact us on 082 496 5444.

Wooden Deck and Stairs Built in Umhlanga, Durban

This wooden deck we built for a client in Umhlanga, Durban was a suspended wooden deck about 2.8m off the ground. The idea was to make use of the flat concrete roof as a deck because the views from up there are of Durban Anchorage where ships anchor before proceeding to Durban port.  The views also extend all the way down the Golden Mile of Durban.

We didn’t want too many posts going to ground as the area beneath the wooden deck is still used as an outside patio. So we built our substructure using H4 CCA Treated pine in a 50 x 228 size rather than the normal 38 x 114. This way we could span our wooden joists of the deck across a longer distance without the need to support them below with another beam, and therefore posts. We attached the one end of the row of joists with a T joint to another 50 x 228 beams which carried the one side. The other side of each joist was hung in a custom-made galvanised steel joist hanger. The result was that our entire substructure was in one plane rather than having the joists sitting on top of a beam. It allowed us to keep the ceiling height of the deck higher, without having to increase the height of the top of the deck surface. These pine wooden joists were later sanded and sealed to make them look closer to the balau we installed on top of the pine.

The wire rope balustrade was fairly straight forward and we extended it past the deck on to the concrete slab flat roof.

The challenges in this wooden deck came in building the stairs. We had a fixed height to work with and a limited lateral distance in which we had fit all of our treads and risers whilst still keeping our risers and treads compliant. To add to this we had a window we had to pass to get down quick enough in our stair case in order to miss the window, plaster band and plumbing on the side of the house. The only way possible was to split the staircase into three flights with two landings where the flights turned at 90 degrees. We also had to split each landing into three windings in order to gain an extra two risers per landing in order to finish the stairs where they needed to finish. We adjusted the tread depth to shorten our treads and therefore total lateral distance to basically “sqwish” then all in. Normally we use 3 pieces of 30 x 102 balau for treads with two 5mm gaps between boards resulting a tread width of 316mm. We ripped the middle 30 x 102 to 50mm to reduce this lateral distance whilst still remaining compliant at 264mm but gaining some lateral distance in order to squeeze them all in. We finished it off with balau deck board cladding in order to cover all the pine structure. The job took time but it was well worth the wait. Stairs that look nice, work nicely and remain compliant.

It was all finished with an oil based sealer which penetrates the wood rather than drying on the surface.

Contact us for quotes on your wooden decking, stairs, balustrade and other outdoor timber construction. You can call us on 082 496 5444 or you can use the contact us form below.

Timber Suppliers in Durban

As a spin-off of our deck building activities in Durban we started buying and selling decking timber. We found that due to the volume of timber we purchase we can secure it at a better rate and therefore provide it to the end-user, or contractor, at competitive rates.

We carry the most common decking timber sizes and species of timber. A brief outline of our stock follows.

H3 and H4 CCA Treated pine which is normally used for substructures. The most common sizes here are 38 x 114 used as joists and 50 x 228 used as beams. We stock them in various lengths to suit your needs. We also stock a 76 x 76 H4 CCA Treated pine square post. Other sizes are available with short lead times.

H3 treated timber is suitable for use outdoors where it is exposed to the elements and is subjected to occasional wetting (i.e. it gets wet, but has time to dry). Timber that is in constant contact with wet soil needs to be H4 CCA Treated. Timber living in fresh water is H5 treated and salt water requires H6 treatment.

We carry both 19 x 68mm and 19 x 90mm reeded (grooved) yellow balau deck boards. Again we stock various lengths to suit your needs from 2.4m to 4.2m lengths. They are all sourced from either Indonesia or Malaysia and are either MTCC (Malaysian Timber Certification Council) certified or PEFC Certified. (Programme for the Endorsement of Forest Certification).

We also stock a range of structural balau ranging from 30 x 40 to larger 30 x 102mm and 30 x 215mm pieces. Although we don’t carry larger pieces, they can be sourced relatively quickly.

Other decking products such as Massaranduba and Garappa are also available with relatively short lead times.

Decking screws, sealing agents and other timber decking supplies are also available to provide a one stop shop for all your decking requirements.

We will also assist in the design of your deck, if required, and we can assist in calculating quantities in order to limit waste.

For a quote on all your decking timber requirements please call us on 082 496 5444 or use the contact us form below.