Parquet flooring was very popular many years ago but a lot of it was covered up with carpets back in the 70’s. It seems crazy now that one could cover the parquet flooring with carpets, but that was the thing of the day and fashions come and go. I’ve recently refurbished several parquet floors by sanding them down and re-sealing them after old carpets have been lifted and they still hold their charm.
There are various types of parquet floor one can get using different wood that gives a slightly different grain, colour and texture. Of course you should always purchase your parquet flooring from a reputable supplier to ensure that you are getting top quality. Your floor will need to last many years and you don’t want to spend the money on installing it only to have to re-do the work later. Also as timber ages it naturally darkens so to try to match the colour of timber with new pieces is very difficult.
Parquet flooring comes in tiles which are made up of the small strips you see. So they are not all laid individually but rather as a sort of tile which is about 300mm x 300mm squares. It makes it much easier to lay and will result in a better finished product because of course there is less room for error in laying them. They are glued down to the floor using a suitable adhesive. Again the floor needs to be completely flat in order to achieve a good quality result. If the floor is not flat, screed it first to remove low and high spots first and then lay your floor.
The individual strips are normally laid perpendicular to each other to give it effect but some very interesting patterns can be found such as herringbone, triangles and inserts are also possible. Parquet flooring is very versatile and you can lay the tiles in just about any pattern you wish and the choices are limited only by your imagination.
For the budget concerned folk out there an alternative to buying new parquet flooring is to use second-hand parquet flooring. I have seen many houses have their old parquet flooring ripped out and discarded. This timber is still sound as most of the older houses used good quality teak in their floors. With a little cleaning and sanding those parquet floor tiles can be made to look like new. Don’t discount the value of second-hand tiles.
To finish the floor, you should sand it using the floor sander, fill any gaps with a suitable gap filler, sand again and then move up to finer grits remembering to sand into the corners with a smaller rotex style sander. A good quality polyurethane should be used either in mineral based or water based. Water based is of course more easily applied, less messy and one can apply multiple coats in the same day as it dries very quickly. Remember to sand lightly with a fine grit paper between coats to get rid of the hairs which stand up after applying coats. This will result in a smooth finish. The polyurethane comes in either high gloss, matt or satin. The choice is yours.
For a free no obligation quote or advice on your parquet flooring please complete the form below or call us on 031 – 762 1795.