Parquet Flooring Installer Durban and Cape Town

Parquet flooring Installer Durban and Cape Town

Parquet flooring was very popular many years ago but a lot of it was covered up with carpets back in the 70’s. It seems crazy now that one could cover the parquet flooring with carpets, but that was the thing of the day and fashions come and go. I’ve recently refurbished several parquet floors by sanding them down and re-sealing them after old carpets have been lifted and they still hold their charm.

There are various types of parquet floor one can get using different wood that gives a slightly different grain, colour and texture. Of course you should always purchase your parquet flooring from a reputable supplier to ensure that you are getting top quality. Your floor will need to last many years and you don’t want to spend the money on installing it only to have to re-do the work later. Also as timber ages it naturally darkens so to try to match the colour of timber with new pieces is very difficult.

Parquet flooring comes in tiles which are made up of the small strips you see. So they are not all laid individually but rather as a sort of tile which is about 300mm x 300mm squares. It makes it much easier to lay and will result in a better finished product because of course there is less room for error in laying them. They are glued down to the floor using a suitable adhesive. Again the floor needs to be completely flat in order to achieve a good quality result. If the floor is not flat, screed it first to remove low and high spots first and then lay your floor.

The individual strips are normally laid perpendicular to each other to give it effect but some very interesting patterns can be found such as herringbone, triangles and inserts are also possible. Parquet flooring is very versatile and you can lay the tiles in just about any pattern you wish and the choices are limited only by your imagination.

For the budget concerned folk out there an alternative to buying new parquet flooring is to use second-hand parquet flooring. I have seen many houses have their old parquet flooring ripped out and discarded. This timber is still sound as most of the older houses used good quality teak in their floors. With a little cleaning and sanding those parquet floor tiles can be made to look like new. Don’t discount the value of second-hand tiles.

To finish the floor, you should sand it using the floor sander, fill any gaps with a suitable gap filler, sand again and then move up to finer grits remembering to sand into the corners with a smaller rotex style sander. A good quality polyurethane should be used either in mineral based or water based. Water based is of course more easily applied, less messy and one can apply multiple coats in the same day as it dries very quickly. Remember to sand lightly with a fine grit paper between coats to get rid of the hairs which stand up after applying coats. This will result in a smooth finish. The polyurethane comes in either high gloss, matt or satin. The choice is yours.

For a free no obligation quote or advice on your parquet flooring please complete the form below or call us on 082 496 5444.

Wooden Parquet Floor Sanding and Sealing

We were called to quote on sanding and sealing the wooden Swiss parquet floors in an old house in Hillcrest. From the pics alongside you can see that these rooms are the typical large ones found in older houses.

Swiss parquet floor sanding Durban

Click to enlarge

The Swiss parquet floors have probably been there well on 40 years or probably even since the house was built. Since then carpets have been put down on top of them, probably in the seventies when those big thick pile carpets where the fashion. The carpets had been lifted some time ago but the sealer on the wooden floor was scuffed in many areas and although it was not peeling off or flaking, it had worn back to wood in high traffic areas and there were various marks on them from pot plants and other items that had been placed on them and left for long periods of time.

The total area we had to sand was 170m², so quite a nice sized area. It consisted of 3 bedrooms, passage, lounge, dining room and study. We were relatively lucky in that the existing coating had deteriorated to a point where it came off quite easily. One always needs to be careful of floors that have been coated fairly recently and still hold a lot of coating or sealer because it tends to clog the sand paper. In these cases one needs to use a very coarse grit paper of about 30 grit and at times you need to sand at 45 degrees to the grain to remove it and then sand again with the grain with a less coarse paper. Also, although the floor is flat, it is never perfectly flat and the large floor sander sometimes

Swiss parquet floor sanding Durban

Click to enlarge

leaves patches. So just turn the machine at a slight angle to get it to flatten the floor in that area and then go back with the grain to get your scratch marks all running in the same direction.

Once the bulk of the sealer or coating is off, one needs to come back with a smaller hand-held sander to remove those stubborn areas. Once it’s all off you need to remove the scratch marks with a finer sand paper. If you’ve started with a 30 grit paper, you may need to then go to a 60 and then to a 100 grit. But always finish on a 100 grit paper.

We used a polyurethane epoxy floor sealer with hardener or accelerator (mineral based) on these floors in order to speed up the drying time. The client was living in the house so we had to limit dust and had to paint rooms in a special order so that they could still live there while we sealed the floors.

I’m still not completely sold on water based products. The water based floor sealers I have used require many more coats to get the same thickness of coating. Although they dry a lot quicker and many more coats can be applied in the same day, they tend to use a lot more and, in my opinion, don’t provide as hard a finish as mineral based

Swiss parquet floor sealing Durban

Click to enlarge

products, especially those with catalysts for hardening.

In between coats we rubbed the floors with steel wool to remove the fibres in the wood that stand up when first coated. A thorough vacuum after that and a second coat was applied.

A quick tip on using the epoxy / polyurethane floor sealer.  Because this product has an accelerator, or hardener associated with it, it goes off, or dries, a lot quicker than a single pack polyurethane.  When you mix your sealer with the accelerator, you should use a flat-bottomed tin such as a coffee tin or jam tin and a flat paddle to mix.  The flat-bottomed tin allows one to mix it thoroughly because there are no ridges for the flat paddle to get stuck on (as opposed to a coke bottle).  A good choice for a flat paddle is a steel ruler.  If you were to pour it directly into your paint tray you will be need to clean that paint tray with every new mix otherwise the sealer will be getting hard already and will interfere with the smooth rolling on the floor.  So place a black dustbin bag (well it can be any colour really) over the paint tray and simply through the black bag away after each mix.  Don’t mix too much as the product has a pot life, (the time it can remain liquid enough to use in the pot).  A hot day will result it in going off quicker than a cold day, or a humid day, and using more accelerator will also result in a quicker drying time.  So be careful with your quantities, you don’t want to waste sealer.

Swiss parquet floor sealing DurbanZ

Click to enlarge

This product should be applied very thinly in order for it to dry quickly.  If it is applied too thickly the top will dry but the middle will still be tacky and it will take much longer to be able to walk on it to flat it and apply subsequent coats.  So mix just enough each time.  If it starts going off in the tray, rather through it away than try to apply it while it is already getting hard.  What happens then is that the front edge of the roller spreads it on the floor and the back-end of the roller starts to pull it off the floor because it is already tacky.  This results in a streaky floor which will mean getting the sander out again.  So rather waste a little sealer and star with fresh sealer than waste time by re-sanding it.  And then of course mix a little less so it doesn’t go off in the pot or tin.

For a free no obligation quote on installing wooden floors or floor sanding and sealing please call us on 082 496 5444 or use the contact us form below.